Monday 28 March 2016

Basic steps in AC repair and maintenance

Periodic maintenance and service of an AC not only ensures effective performance and cooling but it also prevents costly repairs later on. There are some basic steps, which if followed will give clear indication whether air conditioning system needs service.  The users should check the cooling ability of the air conditioning systems before that start of the season or at the time of installation of the air conditioning system.  If there is some decline later on, in the cooling capacity that means the air conditioning system requires services.

Immediately one should go and check the filters. Clean them and replace them if they are replaceable. The clogged filters put burden on the air condition system, as it has to use more electricity for cooling. After filters, the condensers coils must be checked and cleaned.

If the air conditioner has ducts that carry air in the home, then the users must check for any leak from these ducts. It is easy to notice any visible holes or cuts on the ducts .To confirm the presence of any tear or hole, the owner can put the AC on and then see the leakage of cooling from these places. Also if there is any hole or tear, that area will have dust and lint around it. While small leaks can be repaired at home with some taps, for bit bigger and more than one hole, one should immediately call the professional ac repairing service, because any self repair can do more harm than good.


The air conditioning system as far as possible must be kept clean. The dirt and grime increase the working AC Gas Refilling and Repair Services in Delhi load on the air conditioner and makes it to work hard to cool the area, with more electricity. The use of vacuum cleaner will clean the air conditioner completely. Cleaning cooling fins, evaporator and condenser coils will improve the cooling of air conditioner. The low cooling is not always because of low refrigerant.  For window air conditioners, the cleaning may be easy from window side of the system, which is put on the window. If users are not able to clean properly, because of lack of opening tools and other cleaning agents, then, they should engage the professional ac cleaning and repair services. They do the servicing and repair before the start of the season .

They also check the system from time to time to Ac service repair in janakpuri ensure that it is running according to the prescribed standard of the company. The cost of these repair and services are within the budget of every air conditioner user. One of the simplest steps is to protect the air conditioner unit from direct heat of the sun. The outside unit of split air conditioner should be under the shaded area.   For repair and maintenance, there should be clear access to the system. 

Thursday 24 March 2016

Steps to clean split air conditioning system and coils

To keep the air conditioning system running efficiently and giving less electricity bills, it is important to clean it before the start of summer seasons. Thoroughly cleaned air conditioning system effectively cools at less consumption of electricity.  The foam or harsh cleaning spray should never be used for cleaning. The foam spray can spread easily and can be messy. Harsh cleaning sprays can damaged the coils of some split air conditioner cooling coils, which are blue colored hydrophilic layer. Before cleaning the split ac, one can put some bag under it to collect the dust and waste from the unit. The light cleaning spray should be directed at the coils. The chemical solution should reach the last coil. Keep the nozzle of the spray as close to the fins as possible. Rotary blades must also be sprayed. The spray must reach all part to get proper cleaning. After putting chemical spray on the coils and rotary blades, some time should be given to the chemical to work effectively.   May be after 15 minutes, one can use the water spray and wash the dirt and grime. Some of the water will come out from the drain pipe of the air conditioner unit.


Special care must be Ac service centre in dwarka given to the filers of any air condition system. Dirty and clogged filters reduce the cooling effectiveness. Also the air will bypass the filter and go directly into the evaporator coil to reduce the heat absorbing capacity.  With clean filters, one can easily reduce the energy consumption of the air conditioning system by at least up to 15 percent. Some system has filters located in the walls, ceiling, furnaces or in air condition itself. Window air conditions have filters located near the grill close to window. Filters, which are reusable, can be used after cleaning but other must be replaced. The location of air condition determines the gap in cleaning periods. If air conditioner is constantly uses and is located in some dusty climate, then the frequent cleaning of filters will ensure that its effectiveness remain constant throughout.   


Besides cleaning, the users should also see that the fins are in proper shape. These aluminum fins on evaporator or in condenser can be easily bent.  These fins can be put into original position by use of brush, which is not so hard.  Another minor but important step is to check the drain pipe of the system. The drainage pipe should clearly drain out the water. The clogged drain pipe restricts unit from reducing humidity and the excess moisture that results can discolor walls or carpet.



During the off season, the air condition AC Installation Services in Dwarka unit should be covered with good plastic cover to prevent it collecting dust and debris.  To get professional cleaning job done, one can get the services of professionals. Professional cleaning systemically cleans the whole unit at affordable cost.

Monday 7 March 2016

Cleaning Method For Smooth Functioning Of Air Conditioning System

Properly maintaining the air conditioning system is essential to keep the air condition working smoothly and avoiding spending money on repairs. The properly maintained air conditioner, also works more efficiently by giving more cooling at the less consumption of energy. This efficiency keeps the cost of electricity low.

Before starting with any service of cleaning and maintenance, it is essential that the power should be totally cut off to the air conditioner. Then clean the outdoor unite. The condenser has two copper tubes flowing into it, one is bare and other is encased in a foam sleeve. The condenser fins usually get the dirty easily, because the central fans pulls air through them. The fins should be cleaned for proper flow of air through them. When fins are dirty with dust, dead grass and other pollutants, they block the air and reduce the cooling of the system. Fins are fragile, that is why care should be taken to clean them with vacuum cleaner or with soft brush. If fins are bent, then with the use of fin combs, they can be straightened.   To clean the interior of the condenser, one has to remove the fan. But   complete removal of the fan may not be possible, as its wire is connected to the unite .So, the with some help, one can remove the dust from inside the condenser. 

After cleaning inside the condenser, ac service centre in dwarka the fan motor must be checked for lubrication ports. Some motors may be having sealed bearing, which cannot be lubricated. If the motor has open ports, then some drops of electric motor oil must be added into them. The evaporator can be maintained clean by keeping the air flowing from blower clean and this can be done by vacuuming the blower compartment and removing the filter when it is dirty. The fins of the evaporator dehumidify the air, for that purpose a tube is used to collect and drain the condensation. Most of these tubes are flexible plastic and can be easily removed for cleaning. But if they are rigid, then they can be unplugged and cleaned. Every brand and model comes with manual book giving details on various parts of the air conditioning system. Person should read these books before self cleaning the systems. These manual books also show the points for lubrication.


The best way to clean and maintain any air conditioning system is to contact the professional air condition service and get their services. These cleaning services have trained professionals with necessary experience and tools to clean the all parts of the air conditioner.  They also have annual maintenance services, ac installation services in noida where thorough cleaning service is provided and if necessary, the damaged parts are removed with genuine parts. All types of air conditioning system are taken care of by these professional air conditioning cleaning services.